camera after project resize
camera after project resize
Hello,
is there a way to scale the camera together with the project size?
I have a project at 1920x1080 with some camera movements. I want to resize it to a width of 6000 pixel. I use the "modify project" function, but in the new project my camera stays with its original settings and I have to do the camera movements again.
Thanks from Animark
is there a way to scale the camera together with the project size?
I have a project at 1920x1080 with some camera movements. I want to resize it to a width of 6000 pixel. I use the "modify project" function, but in the new project my camera stays with its original settings and I have to do the camera movements again.
Thanks from Animark
TVPaint 10.5.7 - Win10/64
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)
Re: camera after project resize
Try to change the parameters, it should change all the camera's points at the same size =)
- malcooning
- Posts: 2114
- Joined: 29 Mar 2006, 12:43
- Location: Tel Aviv
- Contact:
Re: camera after project resize
There used to be a bug that caused the camera not to scale upon project modification. but it was fixed. do you have the latest TVP version?Animark wrote:Hello,
is there a way to scale the camera together with the project size?
I have a project at 1920x1080 with some camera movements. I want to resize it to a width of 6000 pixel. I use the "modify project" function, but in the new project my camera stays with its original settings and I have to do the camera movements again.
Thanks from Animark
Asaf | asafagranat.com
Re: camera after project resize
Hi and thanks for your help,
unfortunately it doesn't helped
.
- I have the latest update
- I can change the parametres of the cam and it changes every cam-frame - but not the path.
- The cams width and height is changing automatically (scale) after resize, but not the path.
Here is a picture showing the project in 1920 (before) and 6000 (after). I think it demonstrates the problem very well. I have a workaround for that problem (make kind of layout-level to have "markers" to reproduce the cam movement), but I would prefer not to place the cam a second time.
unfortunately it doesn't helped

- I have the latest update
- I can change the parametres of the cam and it changes every cam-frame - but not the path.
- The cams width and height is changing automatically (scale) after resize, but not the path.
Here is a picture showing the project in 1920 (before) and 6000 (after). I think it demonstrates the problem very well. I have a workaround for that problem (make kind of layout-level to have "markers" to reproduce the cam movement), but I would prefer not to place the cam a second time.
TVPaint 10.5.7 - Win10/64
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)
- malcooning
- Posts: 2114
- Joined: 29 Mar 2006, 12:43
- Location: Tel Aviv
- Contact:
Re: camera after project resize
I recreated the situation here, and upscaled 1920 to 6000, and my camera translated well, including the path.
see images (the 6000px is smaller here only because I zoomed out when I captured the screen):
see images (the 6000px is smaller here only because I zoomed out when I captured the screen):
- Attachments
-
- May 30 22-46-41.png (46.8 KiB) Viewed 23309 times
-
- May 30 22-46-21.png (56.92 KiB) Viewed 23309 times
Asaf | asafagranat.com
- Paul Fierlinger
- Posts: 8100
- Joined: 03 May 2008, 12:05
- Location: Pennsylvania USA
- Contact:
Re: camera after project resize
I have the exact same problem and have brought it up recently as something that needs to be looked into.
Paul
http://www.slocumfilm.com
Desktop PC Win10-Pro -64 bit OS; 32.0 GB RAM
Processor: i7-2600 CPU@3.40GHz
AMD FirePro V7900; Intuos4 Wacom tablet
http://www.slocumfilm.com
Desktop PC Win10-Pro -64 bit OS; 32.0 GB RAM
Processor: i7-2600 CPU@3.40GHz
AMD FirePro V7900; Intuos4 Wacom tablet
- Paul Fierlinger
- Posts: 8100
- Joined: 03 May 2008, 12:05
- Location: Pennsylvania USA
- Contact:
Re: camera after project resize
Interesting; I replicated the exact move as well and it works -- the move follows the enlargement. This makes me think that there is some setting that makes it not work and I don't have that activated -- what could it be? 

Paul
http://www.slocumfilm.com
Desktop PC Win10-Pro -64 bit OS; 32.0 GB RAM
Processor: i7-2600 CPU@3.40GHz
AMD FirePro V7900; Intuos4 Wacom tablet
http://www.slocumfilm.com
Desktop PC Win10-Pro -64 bit OS; 32.0 GB RAM
Processor: i7-2600 CPU@3.40GHz
AMD FirePro V7900; Intuos4 Wacom tablet
Re: camera after project resize
This is really strange. I tried several times, but never got good results. I tried with one and more frames, with cam locked and not, with different project sizes.
My TVP is 9.5.18. I think, it is the latest. Maybe you have a newer beta-version?
Yes, what could it be?
My TVP is 9.5.18. I think, it is the latest. Maybe you have a newer beta-version?
Yes, what could it be?

TVPaint 10.5.7 - Win10/64
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)
Re: camera after project resize
yep, bug not fixed in the 9.5.18 version.
It will be fixed in a future version of the product, which is still under development.
Sorry, please be patient.
It will be fixed in a future version of the product, which is still under development.
Sorry, please be patient.

Fabrice Debarge
Re: camera after project resize
Hello,
I like to know if the bug discussed here is fixed in 9.5.21?
The problem exists still in my 9.5.21, but not at our filmschools 9.5.21 ( I am not 100% sure). So I am a little bit confused and would like to hear an official statement
Thanks from Animark
I like to know if the bug discussed here is fixed in 9.5.21?
The problem exists still in my 9.5.21, but not at our filmschools 9.5.21 ( I am not 100% sure). So I am a little bit confused and would like to hear an official statement

Thanks from Animark
Last edited by Animark on 25 Jan 2012, 22:27, edited 1 time in total.
TVPaint 10.5.7 - Win10/64
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)
Re: camera after project resize
hi Animark,
it seems to work properly here since a (beta) v9.5.20 dated dec. 2010.
I also have an older version (sept. 2010) on another computer, with the bug still present.
so I guess every "post-december" public version should work fine.
now, you have to wait an "official statement" for the last words.
what's the date you get with "Help/about TVPA ..." ?
it seems to work properly here since a (beta) v9.5.20 dated dec. 2010.
I also have an older version (sept. 2010) on another computer, with the bug still present.
so I guess every "post-december" public version should work fine.
now, you have to wait an "official statement" for the last words.

what's the date you get with "Help/about TVPA ..." ?
Re: camera after project resize
Hmh?
MY 9.5.21 is stamped as Oct 13 2011. Maybe I should reinstall my version - there must something went wrong with my updates
. I miss the old forum posting with the 9.5 updates. It gave some orientation on when was an update published and what changed and fixed.
After reread your post and think: Are you sure with 2010? My bug report was from May 2011.
Thanks!
MY 9.5.21 is stamped as Oct 13 2011. Maybe I should reinstall my version - there must something went wrong with my updates

After reread your post and think: Are you sure with 2010? My bug report was from May 2011.
Thanks!
TVPaint 10.5.7 - Win10/64
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)
Re: camera after project resize
not sure if it's the real date of this build, but it's the one announced with the "About ..." from the menu (dec. 13 2010).Animark wrote:...
After reread your post and think: Are you sure with 2010? My bug report was from May 2011.

in may 2011, (according to Malcooning few posts above), the bug was already fixed, but probably not released.
Re: camera after project resize
It is the good version and the good date....Animark wrote:MY 9.5.21 is stamped as Oct 13 2011
Hmm, that's weird...
Re: camera after project resize
OK, I've tested the 9.5.21 - Okt 13 2011 at school and the cam-resize-bug is fixed in that version. I think my 9.5.21 at home is broken caused of some update trouble I had somewhere in the past. I will reinstall it.
But the bug-fixed cam in 9.5.21 have the same problems like the cam in TVP 10 I've written in the other post:
http://www.tvpaint.com/forum/viewtopic.php?f=10&t=5503" onclick="window.open(this.href);return false;
But the bug-fixed cam in 9.5.21 have the same problems like the cam in TVP 10 I've written in the other post:
http://www.tvpaint.com/forum/viewtopic.php?f=10&t=5503" onclick="window.open(this.href);return false;
TVPaint 10.5.7 - Win10/64
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)
TVPaint 11.0.8 - Win10/64
TVPaint 11.0.8 - Win10/64 (Wacom Companion 2)