Welcome to TVPaint Community forums !

This may not help at all, because my setup is still as listed in my signature, but I remember realizing some time ago what seemed to cause the cursor to turn from point to arrow (in TVP 10).
I believe I had youtube running on auto play in the background whilst working in typ, some old radio show just for some background noise, and whenever auto play put on the next episode in youtube, the cursor would turn into an arrow in tvp. I thought it was strange that the one thing would influence the other, but then I don't know an awful lot about these things and that's what seemed to be the case, or else it must have been a quite persistently ongoing coincidence.
So if this isn't completely out of the question, and if you had some player or iTunes or something of the sort running whilst working at the time the cursor payed up, you could try to reproduce that bug in such a way.

Hmm, I think we fixed this one, but will try anyway.

Yes, that is the bug fixed in TVPAINT 11.0.3, and that's why we're trying to figure out how David can still experience it.

But thanks for your concern, that's nice !

(I took the liberty to answer your question from that topic, on this one instead -just to keep things clear and we'll organised-)

Elodie, can you help with this pointer thing? Last time it took about 5 days between it happening, now it has happened twice in two days and I have to restart my entire computer to fix it, which is a pain. This has only started happening since version 10.0.3 and the notes indicate that something was changed about the pointer issue. Previously it happened, but just clicking outside the drawing area would reset it, so no need to restart.

Sadly, I am unable to reproduce your issue, and developers can't either.

A little question : when you installed the last version, d you close tvpaint before ? If your're not sure, could you reinstall it (with tvpaint closed obviously).

Plus, why do you need to restart the Mac ? Won't it be enough enough simply close tvpaint and restart the software only ?

I also experienced the problem that David is describing but fortunately it happens very very rarely -maybe once in two months. The last time was a couple of minutes ago, though. I have no idea what is causing it.

Elodie wrote:Plus, why do you need to restart the Mac ? Won't it be enough enough simply close tvpaint and restart the software only ?

Unfortunately, restarting TVPaint does not help. It seems that the only way to resolve it is to restart the computer.

I will try to record it if I know how to reproduce it.

Oh, I am relieved to hear that I am not the only one with this problem. Yes indeed, restarting TVPaint alone does not fix it. Like Furishil says, only a complete computer restart fixes the cursor problem and by the way, it's only in TVPaint. No such curser issues in any other program running at the same time. Because it happens intermittently, it's virtually impossible to video it happening. Might take a week or two, or happen twice in one day.

Good to know, thank you Furushil.

This kind of random bug, as you know, is a real pain in the ass to find.

At least, I see Furushil and I are using the same OS version, so there is still hope

It is a pain to find, so I wonder if you can switch whatever was changed in .03 back to how it was before so that at least it is fixable without having to restart the whole computer. Of course, if you can manage to find it and fix it, even better.

Yes, but before it was much worst, since the bug with hte cursor was more frequent

David_Fine wrote:It is a pain to find, so I wonder if you can switch whatever was changed in .03 back to how it was before so that at least it is fixable without having to restart the whole computer. Of course, if you can manage to find it and fix it, even better.

I experienced the issue about two times before the version 11.0.3. I think, switching back would not solve it.

I do not have the problem described here initially in TVP 11.3 64 bit / Mac OS 10.11.3 but I would like to add that I have issues with the "Point" and "Circle" - mode of the pen cursor. Those problems have happened both in 11.2 and 11.3 :
The Circle-cursor does not appear to be implemented; instead the default arrow is displayed.
The Point-cursor ist displayed, but the spot it points to is not exactly where the brush stroke appears. So I always would have to point a little bit lower and a bit more to the right from the spot where I want to draw.
Leaving out the Pen 1-4 options, the Cross-cursor currently is the only one useable for me.

Thanks and best regards!
Matthias

furushil wrote:I experienced the issue about two times before the version 11.0.3. I think, switching back would not solve it.

Yeah, so really, the solution is just to fix it fully rather than go back to something else which was an issue in it's own way. My experience was that the previous version had this problem, but at least I didn't have to restart my computer, which is a pain. Hope this gets addressed soonish. Thanks.

Aargh! It just happened again now, mere minutes after my last post. All I did was choose a pen to start drawing with and poof, it changed to an arrow and will not swap back to the point. No crazy or unusual use of TVPaint. Just a mundane use of a pen. Just one scene open. This is typical, in that it happens for no particular reason, so I really hope you might be able to look into this soon. Thanks.

Random bugs are the worst to track and fix...

Happened again. I have to restart my whole computer to fix it. Any chance this might be addressed any time soon? As I mentioned, for me it never happened in the previous version so maybe just changing whatever was done, back to that would be better as it's so interruptive to have to close everything down and restart.