Page 1 of 1
Pressure Measure Tool (Test your Wacom)
Posted: 26 Mar 2009, 11:51
by Peter Wassink
Its very simple,
This is an animbrush with 1024 steps that can help you visualise the pressure info that TVP receives from your tablet.
Before use, set up a project with a minimal height of 1024 pixels
best also set the grid to get a decent graph. (see image)
Re: Pressure Measure Tool
Posted: 26 Mar 2009, 12:20
by Elodie
very nice ! Thanks for sharing it =D
Re: Pressure Measure Tool
Posted: 26 Mar 2009, 18:55
by Fabrice
good idea !
So we should be able to compare intuos 3 and 4.
Re: Pressure Measure Tool
Posted: 26 Mar 2009, 19:02
by Peter Wassink
Fabrice wrote:good idea !
So we should be able to compare intuos 3 and 4.
indeed! thats why i dusted off this old idea of mine.
i did consider making a 2048 frame version, but i don't have an Intuos4 yet so maybe later
by the way i noticed (and you can also see it in the image, most notably in the yellow part)
that the pressure level sometimes seems to get stuck around one value.
Is this a problem on the wacom side or could it be that sometimes TVP lags in processing the pressure values?
Re: Pressure Measure Tool
Posted: 28 Mar 2009, 07:33
by Sierra Rose
Yes, this is fun. Thanks.
Re: Pressure Measure Tool (Test your Wacom)
Posted: 15 Oct 2009, 20:15
by Peter Wassink
i just created a 2048 step version, that is able to display the full pressure resolution of the new Wacom Intuos 4 series
its basicly a 2048 frame animbrush of 1X2048 pixels,
it works fine, and i 'd happily share it here
the only problem: the tvpx file is 20Mb (!?) no idea why, the strange thing is the TVPP project from where i took the brush is only just over 3Mb
Re: Pressure Measure Tool (Test your Wacom)
Posted: 16 Oct 2009, 08:34
by Fabrice
technical stuff, too complicated to explain. (but I confirm it's normal)